GOERTZ 괴르츠 MI-2 (Pure copper)순동 JUMPER 점퍼 케이블 [M평판형점퍼케이블]

 

*2조 1세트

*미국 goertz 사의 평판형 flat 스피커케이블 MI-2케이블로 만든 스피커케이블

*길이-약 18cm

*Pure Copper 바나나 말굽 단자

*오디오엔지니어인 Ole Goertz 에 개발된 케이블로 앰프와 스피커 사이의 신호전달에 있어서

  디스토션을 극도로 억제하는 슈퍼 플렛 디자인의  케이블입니다.

*저희 파비안에서 적극 추천하는 점펌 케이블

*Pabian Made

*아래는 Goertz MI-2 케이블 설명입니다.

 

GOERTZ 괴르츠 MI-2 (Copper) Speaker Cable [DIY]
 

* 판매가격-1m가격(3개를 주문하시면 3m를 7개를 주문하시면 7m를 자르지않고 보내드립니다.)

* 10게이지

* 넓이-20mm,두께1mm의 슈퍼 플렛 디자인

* Goertz MI cable은 덴마크의 오디오엔지니어인 Ole Goertz 에 개발된 케이블로

앰프와 스피커 사이의 신호전달에 있어서 디스토션을 극도로 억제하는 슈퍼 플렛 디자인의

케이블입니다.

일반적으로 플렛한 디자인은 신호전달에 있어서 최고의 디자인으로 평가되어 지는데

20여개 나라에서 특하를 획득한 Goertz케이블은 많은 오디오사들이 자신만의

독특한 케이블을 제조하지 않지만 Goertz케이블은 오직 음질만을 위한 초고의 케이블을

완성한 것입니다.

여러 연구에 의하면 플렛 디자인 스피커 케이블이 앰프와 스피커 사이에서 신호 전달에 최적의 요소라고

하여 Goertz 스피커 케이블이 탄생된 것입니다.

신호전송 시 발생하는 노이즈를 최대한 억제하기 위해 Goertz스피커케이블은 슈퍼 플렛 사각 케이블에

Polyester Terapthalate와 최고의 절연체인 Teflon을 쉴드 차폐처리 했습니다.

이런 결과로 대부분의 고가의 스피커케이블이 50 to 200 ohms 을 유지하는데 반해

Goertz스피커케이블은 2에서 4옴의 임피던스를 유지함으로써 디스토션을

근본적으로 차단합니다.

스피커케이블에 디스토션은 resistance ( R ), inductance ( L ) and capacitance ( C )의

정도에 따라 결정됩니다.

Goertz 스피커 케이블은 0.04인치의 얇은 두께와 0.03인치의 분리도와 넓고 플렛한 디지인에

의해 완벽한 케이블을 만들었습니다.

Goertz 스피커 케이블은 이 스피커 케이블을 한마디로 표현했습니다.

Goertz Improves all Frequency Ranges:
LOW . . . MIDRANGE . . . HIGH

고순도의 solid cooper와 독특한 구조로 세계 여러나라의 특허를 획득한 Goertz MI스피커케이블을

자신 있게 권해드립니다.

뛰어난 다이나믹스, 극한의 해상도 ,그리고 맑고 투명함과 자연스러움 이 모두를 가질 수

있는 스피커케이블입니다.

The Lowest Inductance In The Business
 
The patented Goertz MI cable, invented by Ole Goertz, a Danish electronics and audio engineer, eliminates distortion between amplifier and loudspeakers. Patented in 20 countries, Goertz wire is flat by design. Its form follows function, in the best design tradition. We set out to create an electrically correct pathway between amplifier and loudspeaker, which required replacing typical cable psuedo-science with solid physics. Research showed that the perfectly flat shape, with minimum space between conductors, was the best way to achieve this.

But developing such a wire is a different proposition. Many audio companies do not even manufacture their own wire; packaging and marketing the products of others instead. As a primary maker of high-tech laminated conductors for industrial electronics applications, Alpha-Core was uniquely
suited to transform the promising Goertz design into reality. Using the dielectrics Polyester Terapthalate and Teflon applied around each solid rectangular conductor, we achieved an extraordinarily thin profile between the two stacked wires. To provide maximum protection while maintaining thinness, the cable sandwich is then sheathed in tough, high grade polymer.

The result is a wire with a characteristic impedance that closely matches the impedance of loudspeakers. Alpha-Cores Goertz MI wire presents 2 to 4 ohms characteristic impedance as opposed to the 50 to 200 ohms presented by even the most expensive speaker cables. This correct electrical matching results in improved stereo imaging, better clarity, less high-frequency roll off and better low frequency definition.

Goertz Improves all Frequency Ranges:
LOW . . . MIDRANGE . . . HIGH
The degree of distortion along a loudspeaker cable depends on its resistance ( R ), inductance ( L ) and capacitance ( C ). Resistance is dependent on length and conductor cross section. A low resistance provides superior damping between the amplifier and the speaker diaphragm, governing its ability to convey a true, powerful bass and lower mid-range. A high cable inductance causes loss of signal strength towards the high end of the audible range (roll-off). It also causes frequency dependent phase-shift which disturbs true stereo imaging. The square root of the ratio L/C is termed Characteristic Impedance, and is a quality inherent in a cable, dependent on its geometry and materials, but not dependent on its length.

Goertz Virtually Eliminates Mismatch
The characteristic impedance of the Goertz MI cables in the order of 2 to 4 ohms closely matches the impedance of loudspeakers. Almost all other speaker cables have characteristic impedance ranging from 50 to 200 ohms, a mismatch which causes distortion due to signal reflections. Impedance matching primarily improves the clarity of the highs and upper mid-range, but many users have also experienced improvements in the lower mid-range. The cause seems to be that signal reflections caused by impedance mismatch enter the feedback loop of many amplifiers and disturb their ability to reproduce faithfully even lower frequency signals.
Thick on Benefits, Thin as a Penny
The low inductance and characteristic impedance of Goertz cables are due to their flat construction and the nature of their insulation and jacketing material. The configuration places the heavy, solid conductors only 0.003 inches apart. The cables are 0.4 or 0.8 inches wide, and only 0.04 inches thick. As thin as a penny.

Perfect for Home Theater
Goertz MI speaker cable and interconnects are perfect for home theater applications. Due to the low inductance characteristics, Goertz audio products are ideal for long runs. No more positioning your equipment based on the limitations of your cable system. Dolby Digital home theater design requires full range audio frequencies be sent to rear speakers; Goertz cable allows extreme accuracy at any length. The space ratio, the relationship between conductor cross section, is about 50% in Goertz MI cables versus 5-20% in most other speaker cables. In other words, Goertz cables pack heavy conductor cross sections into an extremely slim package yielding greatly improved highs and mid-range, plus a truly powerful bass. Thanks to the flat construction and extreme compactness, they can be drawn anywhere and routed under thin carpets and wallpaper. If desired, paint with oil or water based paint.
What makes them special?






 
Figure 1 is Goertz MI 1 (MI 2 is almost the same thickness, but twice as wide). Each conductor is a 0.375 by 0.010 inch solid band of high purity oxygen free copper (OFC) surrounded by a 0.0051 inch thick sheath of the space age insulation polyester terapthalate. The conductors are placed in close mutual contact within a 0.005 inch thick clear jacket. The mutual distance between the conductors is 0.003 inches and the overall dimensions of the cable are approximately 0.4 by 0.040 inches. The space ratio is close to 50%. The conductor cross section approximates 13 AWG, shown approximately twice actual size.

Figure 2 is a section through a competitors cable extruded from clear PVC, having two stranded conductors of many fine copper wires. The space ratio of this style cable varies between 10% and 20%.

Figure 3 is a so called multiple bandwidth or time compensated cable with two larger and two smaller conductors twisted together inside a common jacket. The two differently sized conductors are used in parallel. The manufacturer claims that the treble components will travel along the lighter conductor, and the bass frequencies along the heavier conductors. The space ratio is 5% to 10%.
The Proof: Oscilloscope readings comparing the performance
of a Goertz cable with conventional designs.



 
Figure 4 illustrates comparative measurements using a 12 kHz square wave transmitted via (I) a 25 foot Goertz cable, and (II) a 25 foot speaker cable of conventional bi-wire construction, both driving a 4 ohms loudspeaker. The characteristic impedance of the two cables are (I) 4 ohms and (II) 100 ohms. (A) is the signal at the amplifier, and (S) is the signal at the speaker.

Time Base = 10µS
Channel 1 V/DIV = 0.5 V
Channel 2 V/DIV = 0.5 V

It is evident that (I) is entirely distortion free, showing only the unavoidable power loss due to cable resistance. (II) in contrast indicates a clear leading edge spike at the amplifier, and significant distortion or roll off at the speaker terminals.





 
Goertz MI 1(Copper)/AG1 (Solid Silver)
The original Goertz cable, MI 1 in 13 gauge (AWG) solid Oxygen Free Copper (OFC) or 12 gauge AG 1 in solid High Purity Silver. The heavy, high purity Oxygen Free Copper (OFC) or solid high purity silver ribbons are sandwiched together, separated only by micro-thin layers of film insulation. The minute amount of active dielectric also provides rapid break-in; now audiophiles dont have to wait tens of hours to break in their cables, Goertz cables produce immediate results!

Goertz MI 2(Copper)/AG2 (Solid Silver)
MI 2 Heavy 10 gauge OFC copper or 9 gauge AG 2 solid silver cabling for improved bass and power handling over the remarkable Goertz MI 1. Great reviews confirm that this remarkable cable really delivers; superb bass control, vivid mid-range, and excellent high frequency extension combine with rejection of interference and no break-in period. Simply great value.

Goertz MI 3 (Cooper)/AG3 (Solid Silver)
Alpha-Cores Big Boy 7 gauge speaker cable; the answer for powerful audiophile systems. MI 3 was designed for high power amplifiers driving full range speakers. Perhaps the best speaker cable made today, the MI 3 delivers sublime clarity, dynamics, and definition throughout the audio spectrum. The extreme low DC resistance ensures diaphragm control for tight, powerful bass and mid-range, and the low inductance carries distortion free highs frequencies and crucial harmonics for outstanding imaging and depth perception.

Goertz 7 gauge MI 3 cables were developed at the request of Dan DAgostino of Krell Industries and other customers who were seeking a speaker cable to complement todays powerful amplifiers. Double the cross section of Goertz MI 2 and AG 2, this newcomer features two solid conductors each measuring 1.25 by 0.012. As in Goertz MI 1 and MI 2, the micro-thin film dielectric means minimum break-in time.

The 7 AWG cable is available in two versions: The MI 3 Divinity in OFC copper, and the AG 3 Divinity in solid fine silver. Both are supplied with four inch user-friendly pigtails, and both feature Alpha-Cores unique solid fine silver spade connectors to fit all high-end binding posts. Goertz AG 3 is arguably the heaviest solid fine silver cable ever made. An eight foot pair contains more than a pound of 99.99% pure silver. So, for that extra muscle to drive the really powerful systems, Goertz MI 3 or MI AG 3 is the answer, The Alpha-Core Big Boys deliver punch in the bass and a sound so revealing that we maybe ought to mark them Adults Only.
Specifications
  Conductors/
Cross Section/
Equivalent Gauge		 Resistance/
Capacitance/
Inductance/
Impedance		 Dielectric Material/
Outside Dimensions
Goertz MI 1:
Center Stage		 High Purity
Oxygen Free Copper
.375 x .010
13 AWG		 0.0044 ohms/ft
0.5nF/ft
10nH/ft
~ 4 ohms		 Polyester Terepthalate/
Polycarbonate
0.4 x 0.04
Goertz MI 2:
Veracity		 High Purity
Oxygen Free Copper
.750 x .010
10 AWG		 0.0022 ohms/ft
0.95nF/ft
6nH/ft
~ 2.5 ohms		 Teflon/ Polyester Terepthalate/
Polycarbonate
0.8 x 0.04

 

저희 고객 박형만님의 간단 평가입니다.

오디오평론가 문**에서 추천하는 그 케이블이군요. 크렐사와 펜오디오사에서 가장 추천하는 케이블이라는..

어낼리시스사 처럼 플랫타입케이블이지만 비청하시면 진가가 나옵니다.노도스트중상급하고 비교해야될듯 .

 

Goertz 케이블은 덴마크의 오디오 엔지니어인 Ole Goertz 에 개발된 케이블로

미국의 알파코어사에서 판매하는 하이엔드 케이블입니다.

앰프와 스피커사이 또는 앰프와 기기 사이의 신호전달에 있어서 디스토션을 극도로 억제하는 슈퍼 플렛 디자인의

케이블입니다.

0.003인치의 울트라 갭의 간격을 사이에 두고 케이블 임피던스가 보통 100~200옴을 이루는

다른 케이블에 비해 2~4옴 정도의 아주 낮은 임피던스를 실현함으로써 케이블자체의

정전용량을 낮춤으로써 신호전달의 이상을 실현 했습니다.

뛰어난 투명도와 뛰어난 해상력 그리고 더욱 깊어진 사운드스테이지와 함께

더욱 넓어진 주파수대역과 다이나믹스는 특허를 획득한 기술로서 그 품질의

우수성을 입증 받았습니다.

지금 미국이나 기타 유럽등지의 사이트에서 선풍적인 인기를 끄는 Goertz 케이블을

오직 저희 파비안만이 합리적인 가격으로 제공합니다.

흔히들 고가인 노도스트 케이블과 비슷하다고 생각하시는데 Goertz 케이블은 노도스트보다

더 진일보한 기술과 감성으로 케이블을 튜닝했습니다.

가격은 품질에 비해 훨씬 저렴합니다.

그 동안 이런저런 케이블에 만족하지 못하신 분들께 자신 있게 추천 드립니다.