oyaide 2.1G DC 커넥터
The Oyaide DC 2.1G (2.1 mm) for arguably the best 18 AWG (aggregate) DC umbilical cable money can buy.
Both the DC 2.1G and DC 2.5G are strongly resistant to vibration with usage of adjustable dampening/spacer rings located at the base of the conductive shaft.
Features of the Oyaide DC-2.1G & DC-2.5G
- Termination method: Solder.
- Made with high quality brass, corresponding to RoHS directive.
- Conductive pin is 24K gold plated.
- Housing is Verichrome plated, for beautiful appearance, as well as durability.
- A large cable entry diameter of 6.5mm to accommodate larger O/D cable.
- To accommodate various depths of DC connector female jacks, a silicone ring spacer is attached to the base of the conductive pin's shaft. The ring spacers can be varied to adjust the active length of the pin to 4 depths: 9.5 mm, 11 mm, 12.5 mm, and 14 mm.
Applications for the Oyaide DC-2.1G and DC-2.5G DC Plugs
Use for new DC cable construction, or as a DC plug replacement for AC/DC adapters, etc.
* Confirm the DC jack polarity of your target device, and terminate conistent with that orientation.
DC-2.1G specification
| Body material | Brass 24K gold plated finish |
|---|
| Cover material | Brass with Verichrome plating finish |
|---|
| Plug type | DC 2.1G (φ 5.5 mm × φ 2.1 mm) DC 2.5G (φ 5.5 mm × φ 2.5 mm) |
|---|
| Rating | 12V / 0.5 A |
|---|
Maximum cable O.D.
(outside diameter) | 6.3 mm |
|---|
| Accessories | Three silicone spacer rings are included |
|---|
